Terxon LX 8-Zone Wired Extension (Art. no. AZ4230)

  • 5-wire bus connection
  • 2 transistor outputs
  • Enables individual identification of detectors (advisable in areas where safety and security are important)
  • Allows clustering in logical areas
  • Minimises cabling work

Terxon LX 8-Zone Wired Extension (Art. no. AZ4230)

For trouble-free and safe operation, this device must be installed and regularly maintained by a specialist trained by us. Arrange regular maintenance appointments with your installer to ensure trouble-free operation over the long term with the latest safety updates and new functions.

The Terxon LX 8-zone Wired Extension is an extension module for the Terxon LX. With this module you can extend your alarm system by 8 wired alarm zones. The 8 zones of the wired extension are connected to the motherboard of the Terxon LX via bus cables. You can connect up to 32 extension modules (wireless or wired) to your existing alarm control panel. The Terxon LX can thus be expanded to 264 zones. The additional alarm zones are freely programmable and monitored against tampering. The type of wiring – NC or DEOL – is left up to you, but it must be the same for all zones. You can address the zones of the extension module via jumper.

Art. no.: AZ4230
Dimensions: (WxHxD) 128x183x35 mm
Connections: 5-wire bus
Number of wired zones: 8
Width: 128 mm
Housing material: ABS
Height: 183 mm
Length: 35 mm
Power consumption: 60 W
Max. operating temperature: 55 °C
Max. humidity: 96 %
Min. operating temperature: -10 °C
Net weight: 0,31 kg
Sabotage monitoring: 1
Switching outputs: 2 Transistor-outputs (1 positive/negative switching output each, 100mA)
DC voltage supply: 12 V
Power consumption: 60 mA
Zone closure: NC, DEOL (FSL)

Scope of delivery:

  • 1x Terxon LX 8-zone wired extension

General Downloads:

Questions & answers

FAQ
Security glossary